Safety Guidelines - Elation IP TESTER User Manual

S A F E T Y G U I D E L I N E S
This device is a sophisticated piece of electronic equipment. To guarantee a smooth operation, it is
important to follow all instructions and guidelines in this manual. ELATION PROFESSIONAL is not
responsible for injury and/or damages resulting from the misuse of this device due to the disregard of the
information printed in this manual. Only the original included parts and/or accessories for this device
should be used. Any modifications to the device, included and/or accessories will void the original
manufactures warranty and increase the risk of damage and/or personal injury.
PROTECTION CLASS 1 - IP TESTER MUST BE PROPERLY GROUNDED
THIS DEVICE MUST ONLY BE USED BY AN AUTHORIZED ELATION TRAINED
SERVICE TECHNICIAN. DO NOT ATTEMPT TO USE THIS DEVICE WITHOUT BEING
FULLY TRAINED ON HOW TO USE IT. ANY DAMAGES OR REPAIRS TO THIS DEVICE
OR ANY ELATION AND/OR NON-ELATION LIGHTING FIXTURES CONNECTED TO
THIS DEVICE RESULTING FROM IMPROPER USE, INCORRECT PRESSURE/VACUUM
SETTINGS, AND/OR THE DISREGARD OF THE SAFETY AND OPERATION
GUIDELINES IN THIS USER MANUAL VOIDS THE ELATION WARRANTY AND ARE
NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS, AND MAY ALSO
VOID THE WARRANTY FOR ANY NON-ELATION LIGHTING FIXTURES.
DO NOT PLUG IP TESTER INTO A DIMMER PACK!
KEEP FLAMMABLE MATERIALS AWAY FROM IP TESTER.
DRY LOCATIONS USE ONLY!
DO NOT EXPOSE IP TESTER TO RAIN, MOISTURE, AND/OR SEVERE ENVIRONMENTS!
DO NOT SPILL WATER AND/OR LIQUIDS ON OR INTO THE IP TESTER!
IP FIXTURE MUST BE POWERED OFF AND PROPERLY COOLED BEFORE TESTING.
PLEASE REFER TO THE IP FIXTURE USER MANUAL FOR PROPER COOLING TIMES.
ENSURE NO DUST, WATER, OR DEBREE ENTERS THE IP FIXTURE WHEN REMOVING THE
AIR RELIEF VALVES! CAREFULLY INSPECT THE AREA AROUND THE AIR RELIEF VALVE
OPENINGS BEFORE REPLACING THE AIR RELIEF VALVE AFTER TESTING IS COMPLETE.
DO NOT connect an external compressor to the device.
AVOID brute force handling when transporting or operating.
DO NOT expose any part of the device to open flame or smoke. Keep device away from heat sources
such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
DO NOT use device in extreme and/or severe environments.
DO NOT operate device if power cord is frayed, crimped, damaged and/or if any of the power cord
connectors are damaged and do not insert into the device securely with ease. NEVER force a power cord
connector into device. If the power cord or any of its connectors are damaged, replace it immediately with
a new one of similar power rating.
CAUTION: Device should be operated by qualified and trained professionals ONLY.
Read user manual carefully to ensure normal operation and lifespan of the device.
ONLY use the original packaging materials and/or case to transport the IP Tester in for service.
6