Elation IP TESTER User Manual page 27

Step 4:
To save test results, first select your file location, name your file, then click:
Test results can be saved in two file formats: .gmv and .xlsx (see below). When saving to .xlsx
format, enter the device serial number so it will correctly display in .xlsx table.
Step 5:
To check the results that you saved in .gmv:
- The test results saved in .gmv format can be opened from your computer with the IPTester PC
software. First click on 'Open a project', then navigate to the location where you saved the
project file from Step 4 above, and click 'Open'.
- Depending on the unit setting (psi or kpa), the IP Tester can work independently of a PC and
automatically saves test results in either a .psi or .kpa format on the Micro SD card, which can
then be viewed by the IPTester PC software.
27