Maintaining and cleaning the mains rectifier
3
➤ Fit wire sleeves to the ends of wires which you wish to connect to the mains
rectifier.
➤ Connect the battery using the B+ and B– terminals on the front plate (fig. 3,
page 12).
➤ Connect the BDF50 compressor
– using the C+ and C– terminals (fig. 4 1, page 12) or
– using the socket on the front plate (fig. 4 2, page 12).
8
Maintaining and cleaning the
mains rectifier
!
WARNING! Danger of electrocution!
Always disconnect the mains plug before you clean and service the
device.
A
NOTICE! Danger of damaging the device!
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during cleaning as
these can damage the device.
➤ Occasionally clean the device with a damp cloth.
12
4
2
MPS50
1
EN