Gin G-chute User Manual page 14

Put the G-chute flat on the ground.
Start to fold the net into a S-shape on top.
In case your harness does not have a G-chute
pocket, fold your G-chute into the available
GIN G-chute pocket.
Wrap the red pocket and secure it with the
two velcros.
Fold the G-chute and the net to the center.
Now the G-chute and the net should be in a
square shape.
Make sure that there is only a little of the riser
visible, while the rest is stored in the red
pocket. Close it with the rope.
Close the clip and attach the G-chute pocket
to your harness.
G-chute manual: 14