Installing The G-Chute - Gin G-chute User Manual

G-chute manual: 11
Installing the G-chute
The G-chute can be used on any harness and with any glider. However, high aspect ratio
gliders profit the most from the reduced G-forces while descending in a spiral. The ​ G -chute
can either be installed in a especially designated pocket of the harness (called G-chute or
Anti-G pocket), or can be installed on one of the main carabiners of your harness. Some
harnesses like the Genie Race series have a special G-chute pocket and you will also find
a small maillon to connect your G-chute. In case your harness does not provide a similar
pocket, you can store your G-chute in any pocket of your harness and connect the G-chute
to one of the main carabiners of your harness.
Genie Race 4 G-chute pocket. The G-chute can be connected directly with the dedicated maillon.
Maybe you find that no pocket of your harness is suitable to store your G-chute. In that
case you can connect it with the available G-chute pocket to the main carabiners.