Appliance Functions; Led Display; Setting The Handset Volume; Using The Memory Locations (Private Directory) - ASCOM Office 10 User Manual

Appliance functions

LED display

The handset is on-hook:
LED lit:
• A caller was unable to reach you and asks you to call
+
him back ( Answering the callback
• A subscriber used *38 to activate the LED (
) and asks you to call him back (
functions
callback )
LED flashing slowly:
Telephone is not logged in (
LED flashing quickly:
+
Call pending ( Answering a call

Setting the handset volume

You are making a call:
1 Quieter.
Louder.
B
2
(Keep pressing the key until you hear an acknowledge-
ment tone.)
There are four volume levels.
8
All manuals and user guides at all-guides.com
).
+
Other
+
Answering the
+
Installation )
)
Activating/deactivating the programming mode
To make the following settings you need to activate the programming
mode:
The handset is on-hook:
You hear the idle tone (
You no longer hear the idle tone.
The programming mode is activated.
(Keep pressing the key until you hear the acknowledge-
ment tone.)
Now adjust the settings. Once you are finished, deactivate the pro-
gramming mode once again:
The programming mode is activated:
The programming mode is deactivated.
Using the memory locations 0 to 9 (private directory)
Your telephone set has 10 memory locations, under which you can store
any call numbers or functions of your choice:
+
The programming mode (
Activating/deactivating the programming
mode ) is activated:
. . . Select a memory location.
0
9
Key in the call number or function
of your choice.
or Confirm the new setting and save.
The previous setting is retained.
END END
ascom
Office 10
+
Glossary ).
20316549en_ba_a0