Page 1
USER MANUAL PD98X(G) DIGITAL TRUNKING PORTABLE RADIO...
Page 2
Preface Welcome to the world of Hytera and thank you for purchasing this product. This manual includes a description of the functions and step-by-step procedures for use. It also includes a troubleshooting guide. Please refer to the corresponding Feature Book for detailed features and operations.
Page 3
No part of this reception can be determined by turning it off and then Hytera is the trademark or registered trademark of manual may be copied, modified, translated, or on. The user is encouraged to try to correct the...
Page 4
Standards · User awareness instructions should accompany · Use of non-approved antennas, batteries, and Hytera's portable radio complies with the following device when transferred to other users. accessories causes the radio to exceed the FCC RF energy exposure standards and guidelines: RF exposure guidelines.
Page 5
· This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en...
Contents Emergency Call Message Services Items in the Package Sending a Text Message Product Overview Sending a Quick Text Message Product Controls Sending a Status Message LCD Icon Viewing a Received Message LED Indicator Troubleshooting Before Use Care and Cleaning Attaching the Antenna Product Cleaning Installing the Micro SD card...
Items in the Package Part Name Part Name · The pictures in this manual are for Side Key 1 (SK1) 12 LED Indicator Please unpack carefully and check that all items listed reference only. Push-to-Talk (PTT) below are received. If any item is missing or 13 Antenna ·...
Icon Radio Status Icon Radio Status You can adapt your radio to use the TK, SK1, One or more work orders are received. There is/are unread short message(s). and SK2 as shortcuts to various radio features The maximum number of saved work orders by requesting your dealer to program the keys.
LED Indicator Icon Radio Status Radio Status LED Indication connected. The Call Divert feature is enabled. LED Indication Radio Status Flashes blue every The wireless device is Flashes green Being turned on. 1.5s connected. A half-duplex private call is in progress. Flashes green slowly Standby.
Install the Micro SD card as follows (if required): · Upon power-on, the radio automatically Loosen the screw fixing the Micro SD card checks if the battery is approved by Hytera cover, remove the cover, and then place the and gives a corresponding indication.
The LED indicator on the charger shows the charging Align the accessory (such as an audio accessory status. For details, see the following table. Use the charger specified by Hytera to charge or a programming cable) plug with the accessory LED Indication Charging Status the battery.
Basic Operations Checking the Battery Power Adjusting the Volume You can check the current battery power by holding Turning On/Off the Radio down the Battery Power Indicator key programmed by your dealer, and release the key to exit. Battery power indications and alert tone are listed below: Icon LED Indication/Tone The LED indicator glows green.
alias of the new contact, and save it. Locking or Unlocking Keys and Knobs You can go to Menu > Settings > Radio Set > Optional Key to set whether the keys and When the keypad is not in use, it is recommended that The ID and alias of a new contact must be knobs still function when the keypad is locked .
Answering a Group Call For other ways to initiate a private call, refer to the corresponding Feature Book with the product. You can answer a group call without any operation. If the radio does not register successfully or an After the group call is established successfully, the empty group is selected by the Group Selector radio emits a tone and displays on the screen.
You can answer a private call without any Go to Menu > Message > New Msg, and then Sending a Status Message operation. The call is established automatically, edit the text. Status messages are preprogrammed by your dealer, Press the OK/Menu key, and then select Send. and the radio displays on the screen.
Troubleshooting Phenomena Analysis Solution The battery may be installed improperly. Remove and reattach the battery. The battery power may run out. Recharge or replace the battery. The radio cannot be turned on. The battery may suffer from poor contact caused by dirty or Clean the battery contacts or replace the battery.
Page 17
Phenomena Analysis Solution The battery power may be low. Recharge or replace the battery. Increase the volume by rotating the On-Off/Volume Control knob During reception, the voice is The volume level may be low. clockwise, or request your dealer to disable the Digital MIC AGC feature. weak, intermittent or totally inactive.
· Clean up the dust and fine particles on the Use the accessories specified by Hytera only; products surface and charging piece with a clean otherwise, the Company will not be liable for and dry lint-free cloth or a brush regularly.
Need help?
Do you have a question about the PD98X and is the answer not in the manual?
Questions and answers