Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bebe Care POD 094444-393
Summary of Contents for Bebe Care POD 094444-393
- Page 1 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS Read all instructions before assembly and use of the high chair. Keep instructions for future use. WARNING BEFORE ASSEMBLING THIS HIGH CHAIR, READ AND UNDERSTAND THE INSTRUCTIONS. Follow the manufacturer’s instructions Do not leave children unattended. The harness must always be used and correctly fitted - most injuries from high chairs are caused by falls. - Page 3 SAFETY PRECAUTIONS FALLING HAZARD: Prevent your child from climbing on the product. Be aware of the risk of tilting when your child can push its feet against a table or any other structure. Read all instructions before assembly and use of the low chair mode. Keep instructions for future use.
- Page 4 CONGRATULATIONS Congratulations on your purchase of the Pod High Chair - Noir This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
-
Page 5: Assembly Contents
Footrest with Front upper leg with footrest bolts pre-drilled holes Rear Upper Leg Leg Cross Brace Phillips Head screwdriver required Bottom Legs (not supplied) There are no accessories recommended for use with this bebe care High Chair. - Page 6 ASSEMBLY / OPERATING INSTRUCTIONS To fit Legs & Footrest... Locate the two front upper legs. Ensure they are the legs that have the pre-drilled holes in the front of them. Line up the screw and the hole and turn clockwise until the leg is firm.
- Page 7 ASSEMBLY / OPERATING INSTRUCTIONS To fit Legs & Footrest Continued... Locate the two rear upper legs. Line up the screw and the hole and turn clockwise until the leg is firm. Do not over-tighten. Repeat for opposite side. The chair should resemble the image as shown. Lay chair face down.
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To attach Tray... PLEASE NOTE! The plastic tray can be adjusted and has three positions. To attach tray; align the tray with the arm rests, push button at the front of the tray while sliding tray along armrests to desired position. Release button.
- Page 9 ASSEMBLY / OPERATING INSTRUCTIONS To convert to Low Chair Mode... The high chair can also be converted into a low chair by inserting the four bottom legs directly into the seat by turning clockwise until the legs are firm. Do not over-tighten. PLEASE NOTE! The Low Chair Mode can be used with or without the Tray.
-
Page 10: Maintenance
HOW TO CARE FOR YOUR CHILDCARE HIGH CHAIR Cleaning This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference. To ensure the long-lasting use of your high chair, wipe down with a damp cloth and use a mild soap solution if necessary. - Page 11 Cybex, Evenflo, Good Baby, Lascal, Maclaren, Project Nursery, Summer Infant and Yookidoo. Our own brands, including Childcare, have gone from strength to strength in recent years. Childcare, and our premium brand bebe care, demonstrate our commitment to quality and continuing investment in product development.
- Page 12 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 20 Calarco Drive, Distribution Derrimut, VIC, 3026 2-6 Argyle St, Morningside, Customer Service 1300 667 137 PO Box 41-014, St Lukes, Auckland, New Zealand W: www.cnpbrands.com.au Customer Service: 0800 567 5000 E: info@cnpbrands.com.au F: www.facebook.com/CNPBrands E: helpline@wainhousedist.co.nz...
Need help?
Do you have a question about the POD 094444-393 and is the answer not in the manual?
Questions and answers