Page 6
AS/NZS 2172:2013 Raw Material: Wooden Pine Finished Product Coated With: Conforms to Standards Varnish or Painted (non-toxic) Mattress made in europe...
Page 7
The washer (S) is to protect the cot ends from being scratched when fitting or removing the cot-side (C). Please ensure that the threaded bolt (H) (J) is completely tightened.
Page 8
The washer (S) is to protect the cot ends from being scratched when fitting or removing the cot-side (C). Please ensure that the threaded bolt (H) (J) is completely tightened.
Page 12
TO UNBRAKE TO BRAKE A minimum distance of 500 mm is maintained between the top surface of the mattress and the top of the lowest side or end with the access closed and the base in its lower position. A minimum distance of 300 mm is maintained between the top surface of the mattress and the top of the lowest side or end with the access closed and the base in its upper position.
Need help?
Do you have a question about the Nordica and is the answer not in the manual?
Questions and answers