Replacing The Oven Light - BALAY 3HDS530X Instruction Manual

Problem
E03" appears in the display.
E05" appears in the display.
E10" appears in the display.
E11" appears in the display.
E15" appears in the display.
Replacing the oven
light
All manuals and user guides at all-guides.com
Possible cause
The electronic circuits have
overheated.
Communication error
Data error
A symbol was touched for
too long.
The oven has become too
hot.
Repairs may only be carried out by fully trained
after sales service technicians.
Incorrect repairs may result in serious injury to the
user.
If the oven light fails, it must be replaced.
Heat-resistant spare bulbs can be obtained from the
after-sales service or specialist shops.
Only use these bulbs.
Comments/remedy
The cooling fan is operating. E03" will
clear after cooling and the oven will
continue heating.
Switch off the fuse in the fuse box, wait
approximately 20 seconds and then
switch it on again. Reset the time. If this
error occurs frequently, call the
after sales service.
Switch off the fuse in the fuse box, wait
approximately 20 seconds and then
switch it on again. Reset the time. If this
error occurs frequently, call the
after sales service.
Touch all control buttons individually. If
the error message remains, please
contact the after sales service.
Let the oven cool and then you will be
able to operate it again. If this error
occurs frequently, call the after sales
service.
35