Basic Settings - BALAY 3HDS530X Instruction Manual

Changing the timer period
Cancelling the setting
The timer and duration
count down simultaneously

Basic settings

Function
In 1 Time in the clock display
In 2 Signal duration after a set
time has elapsed
In 3 Adoption time for adjustment
increments
In 4 The cooling fan runs on until
the oven reaches a certain
temperature.
In 5 Display brightness
In 6 Audible signal when starting
* Exception: The time is shown when the residual heat is displayed.
All manuals and user guides at all-guides.com
Touch the j clock symbol. The a symbol will flash.
Change the time by touching the - or + symbol.
Start with the ok symbol.
The set timer continues to run even if the main switch
is switched off.
Touch the j clock symbol. Reset the time to 0:00
using the - symbol. Confirm with the ok symbol. The
time reappears in the display.
Both symbols are lit in the display. The timer counts
down visibly.
To call up the duration ?, end time ! or time j:
Touch the j clock symbol repeatedly until the ?
duration symbol, ! end time symbol or the j clock
symbol appears.
The value called up will then appear in the display for
a few seconds.
Your oven has several basic settings. You can adapt
these settings to your own preferences.
Option 1
The time is always
displayed.
Short
Approximately
20 seconds
Short
run on time
Dim
Off
Option 2 Option 3
The time is only
shown when the
oven is in
operation*
Medium Long
Approximately Approximately
30 seconds 40 seconds
Moderate Long
run on time run on time
Moderate Bright
On
27