Preferences - Biddle HR 25 Manual

HR M
ANUAL
Filter
Cleaning the display
Timer
3.4

Preferences

Preferences
Set language
Set date and time
Manual version 4.1 (26-07-2018)
Dirty filters make the unit less effective. It is therefore neces-
sary to clean or replace the filters at regular intervals. The
contamination of filters is measured with the optional filter
sensor or calculated on the basis of the lifespan.
The lifespan of the filter is calculated on the basis of the usage
of the unit if no filter sensor has been installed. You can adjust
this by setting the maximum lifespan of the filter.
When the filters are contaminated or when the maximum
lifespan has elapsed, a message appears on the Home screen.
Also, a signal can be generated on one of the outputs.
New filters are available from Biddle.
The screen can be cleaned using a damp, soft cloth.
Use this function to disable the touch screen for 20 seconds in
order to be able to clean it.
The b-touch control panel has a week timer. You can set two
start and stop times for each day of the week. The unit is on
between the start time and the stop time. The second start
and stop times are optional. When the ON/OFF button is dis-
played on the screen, the unit can also be switched ON or
OFF manually. From the next switching moment, the unit fol-
lows the timer again. When the timer is switched on, the sym-
bol is displayed on the Home screen.
@
The menu Preferences allows you to make settings for the use
of the control panel.
The control panel offers a choice of languages. Choose your
preferred language from the list.
The date and time are necessary for the timer function, the
lifespan of the filter and for tracking usage statistics regarding
the unit.
The automatic summer time function switches the clock to
summer or winter time in accordance with the applicable
European rules. If you do not use this function, you can switch
to summer time manually. The clock is then set one hour for-
ward.
O -
PERATION VIA B TOUCH
en-41
en