Table of Contents
Advertisement
en
I
NTRODUCTION
1.4
Components and accessories
en-10
Maximum number of units to be connected
The number of ventilation units that can be connected to the
heat recovery unit depends on the unit's capacity and the
effective capacity of the ventilation units that are to be con-
nected. If in doubt, consult your Biddle advisor.
See also:
1.3.4 "Type plate" on page 8
1.3.6 CE declaration
The unit is compliant with the applicable CE standards. The
complete CE Declaration of Conformity can be found at:
www.biddle.info.
1.3.7 Modifications and changes
Without the approval of Biddle, no changes or modifications
may be made to the unit that could adversely affect safety. The
CE declaration is no longer valid if the unit has been modified
or changed in any way.
1.4.1 Components supplied
Note:
n
The illustration shows the unit from above, whereby
the air exchange with the interior takes place on the
left side and the air exchange with the fresh air takes
place on the right side.
•
Modules:
-
supply fan 1
-
extract air filter 2
-
extract fan 3
-
fresh air filter 4
-
heat exchanger 5
•
Electronics module 6
•
Air dampers to fresh air 7
•
Pressure switch over the heat exchanger 8
•
Pressure switch over the fresh air filter 9
•
Fastening material for linking the modules to each other.
H
EAT RECOVERY UNIT
Advertisement
Table of Contents
