Auto Dim; Temperature & Humidity Alerts - La Crosse Technology S82967 Instruction Manual

This station allows you to program a time for the backlight to automatically Dim to level one setting. This
way the station will not interfere with your sleep.
Setup Auto Dim:
1. Hold the AUTO DIM button to set Auto Dim Start and Stop times.
2. Use the + or - button to turn the Auto Dim feature ON. Press the AUTO DIM button to confirm and move
to next item.
3. START TIME will flash. Use the + or - buttons to select your Auto Dimmer's starting hour. Press the AUTO
DIM button to confirm and move to next item.
4. STOP TIME will flash. Use the + or - buttons to select your Auto Dimmer's ending hour. Press the AUTO
DIM button to confirm and exit.
Note: While the Auto Dim is active, if your press the LIGHT button, the backlight will change to the
brightness level selected and stay there. Auto Dim will resume at the next scheduled time.
T EMP E R AT U R E & H U MI DI TY A L ERTS
Programmable Temperature and Humidity alerts keep you on top of changing conditions.
To set alerts:
1. Hold the ALERTS button to enter alert set mode. Outdoor HI ALERT OFF will show.
If you wish to set this alert value, press the + or – buttons to arm this alert (ON).
2. When the alert is armed (ON) press and release the ALERTS button and the alert value will flash.
Press the + or – buttons to change the alert value.
3. Press the ALERTS button to confirm and move to the next alert.
Note: If you do not wish to set an alert, press the ALERTS button again to move the next alert.
(When the alert is OFF (disarmed) press ALERTS button to skip setting that alert value).
Note: Press the LIGHT button at any time to exit.
Wireless Temperature & Humidity Station
AUTO DIM BACK L I G H T
OUTDOOR OUTDOOR
INDOOR INDOOR
OUTDOOR OUTDOOR
INDOOR INDOOR
Page | 6