TAWI PRO40 User Manual page 25

Codes on the battery status display
Message
A. The battery needs charging.
B. There is a bad connection to the
motor.
C. The motor has a short circuit to a bat-
tery connection.
D. N/A
E. N/A
F. Sleepmode (follows a preset period of
inactivity, the function is there to save
the battery).
G. Throttle fault.
H. Controller fault.
J. N/A
K. An excessive voltage has been applied
to the control.
A
B
C
D
E
F
G
H
J
K
Action required
The lifter is shut down and needs charging. Switch it back on
and lower the tool to a safe level. Charge immediately.
Check all connections.
Contact a TAWI authorised service technician.
Restart the lifter.
Make sure the throttle is in rest position before the lifter is
started.
Make sure all controller connections are secure.
Often caused by a poor battery connection. Check the battery
connections.
25