Operating tools
Tools are handled using a detachable hand control and the control panel. If the lifter is not equipped with a
hand control, only the control panel is used.
If a tool hits an object or surface during lowering, a safety mechanism will stop the downwards movement.
This is to prevent accidents.
Raise and lower with the hand control
The hand control can be detached from the handle and has two buttons, up and down. The hand control is
equipped with two speeds. Press firmly for faster movement and press lightly for slower movement.
Standard hand control
A. Press UP to raise
B. Press DOWN to lower
The Position stop hand control has
a button on top, see Position stop
on page 19.
A. Press UP to raise
B. Press DOWN to lower
C. Press the top button on top to
activate Position stop.
12
A
B
C
A
B