02 Bracket types and installation guide
Before installing brackets
• Perform the below steps before installing the product.
Installing the top cover
1
2
3
Removing handles
1
2
Install HOLDER-GUIDE x 2.
Insert the power cord into
the power IN rubber and
connect the power cord.
Connect cables, e.g.
external IR cable, power
cord, HDMI cable, and
organize them as shown
in the image.
Remove the handles from
both sides of the product.
Place the screws back into
the screw holes and fasten
them.
English - 11
4
5
OM46N-D / OM55N-D
Place the top cover.
Securely position the
external IR cable and the
external ambient light
sensor at the specified
location.
– Remove the screw caps
found at the marked
locations before
installing on the ceiling
or with the stand.