Bartec R3 Series Operating Instructions Manual page 62

Maintenance
58
The air stream can
continuously or as a strong air blast. Change the
position of the air outlet nozzle accordingly.
Use the cleaning spray if there are deposits
or hard-sticking dirt particles.
Let the fluid take effect for a short time.
With a cleaning tissue and by applying only
little pressure, carefully wipe off the dissolved
dirt.
Attention:
Never wipe across the lens before solid particles have been removed or
dissolved.
Attention:
For the utilisation of the IR protection window ZnSe, please observe the
safety instructions under chapter 3.3.2.
Ordering details
Designation
Cleaning kit type R300-128 complete
Cleaning fluid PUROSOL
Cleaning tissues PREMATEX
Vacuum brush
Bellows
Operating Instructions Radiation sensors R3XX
be emitted either
Order number
Air stream
Air blast (press hard!)
282302
282366
282367
282368
282369