Bartec R3 Series Operating Instructions Manual page 38

Operation
34
P 0.0
Example
M 0.0
Example
Maximum mode
A "hold time" for maximum values is set here. The maximum value that has
occurred in each case is held for the set time and output. If a new maximum
value occurs during the hold time, the hold time will begin all over again.
The time is set in seconds.
Display P
Minimum value 0.0
Maximum value 999.9
Increment 0.1
Default value 0.0
Minimum mode
A "hold time" for minimum values is set here. The minimum value that has
occurred in each case is held for the set time and output. If a new minimum
value occurs during the hold time, the hold time will begin all over again.
The time is set in seconds.
t
Hold time
h
Actual t
emperature pattern
Temperature pattern that is output
Display M
Minimum value 0.0
Maximum value 999.9
Increment 0.1
Default value 0.0
Operating Instructions Radiation sensors R3XX