Advertisement
1
Installing the Back Cushion
Machines with a 60-Inch Deck
Shipped in a Steel Crate Only
Parts needed for this procedure:
1
Back cushion
3
Flanged-hex bolt
Procedure
1. Lift up the seat onto the springs.
2. Install the back cushion using the 3 flanged-hex
bolts
(Figure
1).
1. Back cushion
Figure 1
2. Flanged-hex bolt (3)
2
Connecting the Battery
No Parts Required
Procedure
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead
compounds, chemicals known to
the State of California to cause
cancer and reproductive harm. Wash
hands after handling.
1. Locate the battery and negative battery cable.
2. Remove the plastic cap from the negative
battery post.
3. Remove the fasteners on the negative battery
cable, and use them to secure the negative
battery cable to the negative battery post
2).
g211172
2
1
6
5
1. Negative battery cable
2. Wing nut
3. Washer
2
WARNING
CALIFORNIA
4
3
Figure 2
4. Negative battery post cap
5. Carriage bolt
6. Negative battery post
(Figure
G018395
g018395
Advertisement
