Advertisement
System 3000
Relay switching insert
Set run-on time
For the automatic switching-off of the load, run-on times can be set, see table.
During the run-on time it cannot be restarted by pressing again.
￭
Press the TEST button (1) for more than 4 seconds.
LED lights up in the colour of the set run-on time, see table.
LED signalling
LED colour
green
white
blue
yellow
red
￭
Release the TEST button (1) briefly and press it repeatedly until the LED lights up in the
colour of the desired run-on time.
The set run-on time is automatically saved after 30 seconds or after pressing the TEST
button (1) for approx. 4 seconds. When the LED goes out, the saving process was suc-
cessful.
5
Technical data
Rated voltage
Mains frequency
Standby load depending on the cover
Switching current at 35 °C
Ohmic
Minimum switching current AC
Connected load
Incandescent lamps
HV halogen lamps
Electronic transformers
Inductive transformers
HV-LED lamps
Compact fl lamp.
Fluorescent lamps, uncompensated
Switching current motors
Capacitive load
Power reduction
per 5°C in excess of 35°C
when installed in wooden or dry construction
walls
when installed in multiple combinations
Ambient temperature
Storage/transport temperature
Number of extension units
82597422
06.05.2019
Set run-on time
Switching without run-on time
Run-on time: 1 minute
Run-on time: 5 minutes
Run-on time: 30 minutes
Run-on time: 60 minutes
AC 230 V~
50 / 60 Hz
approx. 0.1 ... 0.5 W
16 A (AC1)
100 mA
2300 W
2300 W
1500 W
1000 VA
typ. 500 W
typ. 500 W
1200 VA
6 A
920 VA (115 μF)
-5 %
-15%
-20%
-25 ... +45 °C
-20 ... +70 °C
3 / 4
Advertisement
