Viz-Art Automation LEADER Motion Mount Manual

Universal motion mount for multimedia projectors

Advertisement

LEADER Motion Mount
MIDI Motion Mount
Universal motion mount for multimedia projectors:
• Direct
• Adjusted height. 56 – 82 (LEADER); 58 – 84 (MIDI)
• Wys. 74 – 118 (LEADER); 76 – 120 (MIDI)

LIST OF COMPONENTS:

 PROJECTOR MOUNT:
o UNIVERSAL PROJECTOR ADAPTER
o HEIGHT ADJUSTED ARM
 MOUNTING SET
 MANUAL INSTRUCTION
 MOUNTING TEMPLATE

1. INSTALATION:

 Choose a proper mounting area and using MOUNTING
TEMPLATE mark mounting holes for motion mount.
A.
Mount connection panel should be faced to a main
projection screen/area .
C.
Install projector to adapter. Use mounting screws from
the set.
Attention! mounting screws for projector and adapter from
the set, should be property selected according to projector
producer recommendations.
B.
Using hole E place and install projektor cables.
D.
Installing projector with adapter on the motion mount.
Install adapter with projector on the mount. In A holes
screw the screws to hold projector in dedicated position.
1/3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LEADER Motion Mount and is the answer not in the manual?

Questions and answers

Summary of Contents for Viz-Art Automation LEADER Motion Mount

  • Page 1 LEADER Motion Mount MIDI Motion Mount Universal motion mount for multimedia projectors: • Direct • Adjusted height. 56 – 82 (LEADER); 58 – 84 (MIDI) • Wys. 74 – 118 (LEADER); 76 – 120 (MIDI) LIST OF COMPONENTS:  PROJECTOR MOUNT:...
  • Page 2 ADJUSTING PROJECTOR HEIGHT AND POSITION: Adjusting projector height. Using screw B you can adjust Adjusting projector position. expected height of the projector arm. Lock screw B in If projector position on a mount needs adjustment: proper height. In direct version of mount height is fixed . loosen srews C (if needed screw D), tilt the projector to expected tilt position, Then tighten all loosen screws .
  • Page 3 5. Projector Mounting Set (LEADER): screws: M4x12 – 4 szt.; M5x12 – 4 szt.; M6x12 – 4 szt.; Pads: ø4x9 – 4 szt.; ø5x10 – 4 szt.; ø6x12 – 4 szt.; Dowels: ø8x50 – 4 szt. Producer: VIZ-ART Automation tel.+48 22/6138899 www.viz-art.eu...

This manual is also suitable for:

Midi motion mount

Table of Contents