Subscribe to Our Youtube Channel
Related Manuals for Agri-Fab 45-02102
Summary of Contents for Agri-Fab 45-02102
- Page 1 OWNERS MANUAL Model No. 45-02102 125 LB. PUSH BROADCAST SPREADER CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operation Maintenance Repair Parts PRINTED IN U.S.A. FORM NO. 48313 (REV. 5/02)
-
Page 2: Rules For Safe Operation
RULES FOR SAFE OPERATION The following safety precautions are suggested. This Wear eye and hand protection when handling and broadcast spreader is designed, engineered and tested when applying lawn or garden chemicals. to offer reasonably safe and effective service, provided it is operated in strict accordance with these instructions. -
Page 3: Hardware Package
FULL SIZE NOT FULL SIZE HARDWARE PACKAGE KEY QTY. DESCRIPTION KEY QTY. DESCRIPTION Cotter Pin, 3/32" x 3/4" Long Hex Bolt, 1/4-20 x 1-3/4" Long Flow Control Link Hex Bolt, 1/4-20 x 1-1/2" Long Spacer Tube, Short Hex Bolt, 1/4-20 x 3/4" Long Spacer Tube, Long Carriage Bolt, 1/4-20 x 3/4"... -
Page 4: Tools Required For Assembly
Place the short spacer tube and a 3/4" washer onto ASSEMBLY INSTRUCTIONS the end of the axle that has the large drilled hole (left hand side). See Figure 2. TOOLS REQUIRED FOR ASSEMBLY Place the drive wheel onto the axle. The notched hub and the air valve should face to the outside. - Page 5 IMPORTANT: Do Not assemble long handle tube on 13. Assemble the leg stand tube to the long handle tube same side of crossover tube as shaft support plate. using two 1/4" x 1-1/2" hex bolts. Secure tightly Assemble on opposite side. with two 1/4"...
- Page 6 16. Assemble the flow control arm to the flow control 19. Hook free end of flow control rod through hole in mounting bracket using a 1/4" x 3/4" hex bolt, two slide gate bracket located near bottom of hopper. nylon washers and a 1/4" hex lock nut as shown in See figure 9.
-
Page 7: Carriage Bolt
22. Place the adjustable stop into the "ON" end of the 23. Position the flow control mounting bracket slot in the top of the flow control mounting bracket. (Refer to figure 12). Secure with the 1/4" x 3/4" carriage bolt, a nylon a. -
Page 8: Operation
11. Heavy moisture conditions may require a cover over OPERATION the hopper to keep contents dry. The vinyl cover (avail- able as an accessory) acts as a wind and moisture HOW TO USE YOUR SPREADER shield, but should not be used as a rain cover. Refer to the parts list on page 11. -
Page 9: Maintenance
MAINTENANCE STORAGE CHECK FOR LOOSE FASTENERS Rinse inside of hopper and exterior of spreader and Before each use make a thorough visual check of dry off before storing. the sreader for any bolts and nuts which may have Store in a clean, dry area. loosened. - Page 10 REPAIR PARTS FOR BROADCAST SPREADER MODEL 45-02102...
- Page 11 REPAIR PARTS FOR BROADCAST SPREADER MODEL 45-02102 REF. PART QTY. DESCRIPTION REF. PART QTY. DESCRIPTION 44482 Grip, Handle 44466 Hopper 46055 Pin, Spring 1/8" Dia. x 1" Lg. 43882 Rivet, Stainless 1543-069 Washer, Nylon 62482 Ass'y, Guide Closure R19111116 Washer, 5/16 SAE...
-
Page 12: Repair Parts
If you do not know the dealer or distributor in your area, please write to the Customer Service Department of AGRI-FAB, Inc. at P.O. BOX 903, SULLIVAN, ILLINOIS 61951. The return of a product or part to AGRI-FAB ®...
Need help?
Do you have a question about the 45-02102 and is the answer not in the manual?
Questions and answers