Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Firmware File:
Specify the path of firmware file for uploading.
Provisioning Update at each Bootup:
Provisioning Periodic
update: Enable - AP Router will check server for new firmware
everyday and update firmware if new firmware is available.
Provision method:
Provisioning priority defines the provisioning/upgrade server priority
example. Default: HTTP protocol first, TFTP protocol second.
Provision Group Name:
Enter the name for Provision Group.
Provision Config Type:
Default is General Only. This will download General config file only.
Provision Periodic update time:
Provision Retry Interval:
protocol to get firmware image after 1
Provision Retry Limit:
Default: 0. AP Router retry time.
[Config File Provision]
HTTP Provision Config Server Address:
default your HTTP Provisioning server. This server is used for transacting all configuration
files using HTTP protocol. Default: HTTP Address – Your Company's HTTP Server IP
Address.
HTTP Provision Config Directory:
HTTP Provision Config Server Port:
HTTP port to be used for the HTTP Provisioning Server. Default: 80.
TFTP Provision Config Server Address:
your TFTP Provisioning server. This server is used for transacting all configuration files using
TFTP protocol. Default: Your Company's TFTP Server IP Address.
TFTP Provision Config Directory:
TFTP Provision Config Server Port:
nd
Priority), port 100 (2
-Priority) and port 200 (3
on the TFTP servers and their order of priority. Default: 69, 100, 200
[Image File Provision]
HTTP Provision Image Server Address:
your HTTP provisioning server. This server is used for transacting all configuration files using
HTTP protocol. Default: HTTP Address – Your company's HTTP Server IP Address.
HTTP Provision Image Directory:
HTTP Provision Image Server Port:
HTTP port to be used for the HTTP Provisioning Server. Default: 80
TFTP Provision Image Server Address:
your TFTP Provisioning server. This server is used for transacting all configuration files using
Enable update firmware at each bootstrap.
Enter the update time for Provision Period. Default: 24
Default: 180 seconds. AP Router will retry with 2
st
-Priority protocol timeout.
Provisioning HTTP Server Address is set to
Default: cfg
Provisioning HTTP server port is set to 80. This is the
Provisioning TFTP Server Address is set to default
Default: cfg
Provisioning TFTP server ports are set to port 69 (1
rd
-Priority). These are TFTP ports used on the
Provisioning HTTP Server Address is set to default
Default: image
Provisioning HTTP server port is set to 80. This is the
Provisioning TFTP Server Address is set to default
nd
– Priority
st
-
70
Advertisement
Table of Contents
