All manuals and user guides at all-guides.com
[WAN Packet Filter]
Use IP Filters to deny particular WAN IP addresses from the Internet. You can deny
special port number or all ports for a specific IP address. You will only need to input the WAN
IP addresses of the computers that will be denied.
Enable:
Enable/Disable the WAN packet filter. Default setting is Disable.
Source IP:
The IP address of the WAN computer that will be denied access to the Internet.
You can also add a range of IP addresses.
Destination Port:
The single port or port range that will be denied to access. If no port is
specified, all ports will be denied access.
Protocol:
This is the protocol type that will be used with the Port that will be blocked.
Block:
You can block the IP address of the WAN computer always or by schedule.
Day:
If Block set to "by Schedule", you need to determine which day(s) will be performed.
Time:
If Block set to "by Schedule", you need to determine which time will be performed
Action:
Insert a new WAN packet filter or update a specified WAN packet filter.
[LAN Packet Filter]
Use IP Filters to deny particular LAN IP addresses from the Internet. You can deny
special port number or all ports for a specific IP address. You will only need to input the LAN
IP addresses of the computers that will be denied Internet access.
37