Advertisement
Quick Links
One Year Unconditional Warranty
If for any reason, this ProMaster product fails within ONE YEAR of the date of purchase, return
this product to your ProMaster dealer and it will be exchanged for you at no charge. ProMaster
products are guaranteed for ONE FULL YEAR against defects in workmanship and materials. If at
any time after one year, your ProMaster product fails under normal use, we invite you to return it
to ProMaster for evaluation.
i
s
Advertisement
Related Manuals for Promaster 6942
Summary of Contents for Promaster 6942
- Page 1 ProMaster dealer and it will be exchanged for you at no charge. ProMaster products are guaranteed for ONE FULL YEAR against defects in workmanship and materials. If at any time after one year, your ProMaster product fails under normal use, we invite you to return it to ProMaster for evaluation.
-
Page 2: Part Names
Part Names Protective Cover Camera Battery Compartment Power/Signal Contacts Cover Slot Vertical Grip Operation Switch Shutter Button AE Lock / FE Lock / Index/ Main Dial Reduce Button Tripod Socket AF Point Selection / Hand Strap Mount Magnify button Battery Pack Compartment Aperture / Exposure LP-E17 Battery Holder Compensation Button... -
Page 3: Installing The Batteries
Installing The Batteries 1. With your camera and the Vertical Grip 2. Install one or two LP-E17 Li-ion battery(s) 3. Insert the Battery Holder (16) into the 4. Once the Battery Holder (16) is properly Operation Switch (3) OFF, turn the into the Battery Pack Compartment (15) grip and turn the Battery Holder Release inserted, turn on your camera. - Page 4 Caution Congratulations on your purchase of the ProMaster Vertical Control Power Grip for the Canon • This product should only be used with compatible devices specified in this instruction sheet. T6i / T6s. This battery grip will provide longer shooting times for your camera, comfortable •...
- Page 5 Attaching Your Camera 1. Please turn off your 2. Open the camera's 3. Detach the chamber 4. Store the camera battery 5. Align the grip with the 6. Turn the Attachment Wheel camera and be sure the battery chamber. cover by opening it to chamber cover in the camera paying attention to (8) in the direction of the...
-
Page 6: Specifications
Specifications Operation and Use of the Grip Model 6942 1. Your camera must be turned ON for the grip to operate. When your camera is ON the grip Power Source 1or 2 LP-E17 Li-Ion batteries may be switched ON or OFF by using the Vertical Grip Operation Switch (3). Please note,...
Need help?
Do you have a question about the 6942 and is the answer not in the manual?
Questions and answers