Steering System Layout - SSANGYONG Korando 2010 Manual

01-14
0000-00

7. STEERING SYSTEM LAYOUT

1) HPS (Hydraulic Power Steering)
The hydraulic pump is a
vane type pump and
consists of the flow control
valve and pressure relief
valve.
Hydraulic pipe & hose
The steering gear box assembly consists of power cylinder and control valve. The power
cylinder has a cylinder, piston and piston rod. The control valve directs the oil to one end face
of the piston to enhance the steering force. There is a safety check valve which lets the driver
steer manually when there is a malfunction in the hydraulic circuit.
Steering cylinder
Tie rod end
CHASSIS GENERAL INFORMATION
korando 2010.10
The oil reservoir sends the
oil to the power steering
pump and receives the oil
from the power steering
gear.
Steering wheel
assembly
Hydraulic pipe
There is a shock absorber
which is folded in the axial
direction when the vehicle is
crashed and a ignition switch
assembly on the column
shaft.
Column shaft
Lower shaft
The lower shaft minimizes the
torque change using a CV
joint which has constant
angular speed.
Gear box
Tie rod end