Other Functions
Adjusting the Sound
Characteristics
1
Select the item you want to adjust by
pressing the
VOL (volume) n BAS (bass) n TRE
(treble) n BAL (balance) n FAD (fader)
n VOL (volume)
2
Adjust the selected item by pressing
either the
–
Adjust within three seconds after selecting.
EN
(After three seconds the button will again
serve as volume control button.)
Enjoying Bass and Treble
at Low Volume
— Loudness Function
LOUD
Press the
button. n "LOUD" will
appear on the display.
Bass and treble will be boosted. To cancel,
press again.
Muting the Beep Tone
Press the
5
button while pressing
the
button.
SEL
To reactivate the beep tone, press these buttons
once more.
8
Actual total number
button repeatedly.
SEL
+
or
button.
Maintenance
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing the RELEASE
button, then detach it and clean with a cotton
swab dipped in alcohol. Do not apply too
much force. Otherwise, the connector may get
damaged.
Main unit
Back of the front panel
E
Sony XR-3208MK2 (
) 3-856-035-11 (1)