Client - Sharp PN-60TA3 Operation Manual

Client

TIPS
• Refer to the manuals that came with the client.
1. Android/iOS device: Tap [SDConnect].
Windows device: Tap [SHARP Display Connect] on the desktop and tap [Start up
as a participant].
Mac OS device: Double-tap [SHARP Display Connect] in the application folder.
This software starts and a list of hosts connected to the same network is displayed.
2. Tap a host that you want to connect to.
To manually enter the IP address of a host, tap [Manual Entry].
A login information screen appears.
3. Enter login information.
(3)
(1) Connect to
Do not enter this information if you selected a host in step 2.
If you selected [Manual Entry] in step 2, enter the IP address of the host that you
want to connect to.
(2) Name
Enter a user name. (Maximum length: 12 half-width characters/6 full-width
characters)
The name you enter will be displayed on the host (monitor).
* On a Windows/Mac OS device, confi gure the settings under Edit User Profi le in
advance. (page 37)
(3) Icon
Set an image that will be displayed on the host (monitor) when logging in.
To change the image, tap the icon and select a different image.
* On a Windows/Mac OS device, confi gure the settings under Edit User Profi le in
advance. (page 37)
4. When you have completed the settings, tap [Connect].
The main screen on the client appears. (pages 11 to 12)
TIPS
• When authentication via connection ID is set, a connection ID entry screen appears.
Enter the connection ID displayed in "Connection ID" on the Host menu.
• When the application is started for the fi rst time, if a message saying "Windows Firewall
has blocked some features of this program" appears, select all of the check boxes, and
then select "Allow access".
- 9 -
(1)
(2)
Connection ID