Transferring Files Between Clients; Receiving-Side Operation; Sending-Side Operation - Sharp PN-60TA3 Operation Manual

Transferring files between clients

You can transfer files between clients without them being connected to the host.
First set the client that will receive the file to the standby to receive state, and then send the
file from the other client. (Recommended file size: 10MB or less)

Receiving-side operation

■ ■ Android/iOS device
1. On the receiving-side client, tap [Received Files].
2. Tap [Open menu] on the right of the screen.
3. Tap [Receive from Others].
The client enters the standby to receive state.
When a file is received, you are notified of that on the screen. You can view the received file
in the received folder. (page 28)
Tap [Cancel] to end the standby to receive state.
■ ■ Windows/Mac OS device
1. On the main screen on the receiving-side client, tap [File].
2. Tap [RX from Other Users].
The client enters the standby to receive state.
When a file is received, you are notified of that on the screen. You can view the received file
in the received folder. (page 30)
Tap to end the standby to receive state.

Sending-side operation

TIPS
• Do not send fi les from multiple devices at the same time. Depending on the network
environment, this may not work correctly.
■ ■ Android/iOS device
1. On the sending-side client, tap [Send File].
2. Tap [Open menu] on the right of the screen.
3. Select the fi le to send. (page 22)
You cannot send an adjusted image file.
4. Tap [Open menu] - [Send to Other Users].
Clients in the standby to receive state are displayed in a list.
5. Tap the destination.
6. Tap [OK].
7. Tap [Yes].
■ ■ Windows/Mac OS device
1. On the main screen on the sending-side client, tap [File] - [Send to Other Users].
2. Select the fi le to send.
Clients in the standby to receive state are displayed in a list.
3. Tap the destination.
4. Tap [].
- 27 -