Sharp PN-60TA3 Operation Manual page 23

■ ■ Scan by camera (iOS Device)
When you take a picture of paper documents or other materials, scan by camera can detect
the dimensions of the paper and make an image with only that area.
TIPS
• The normal camera starts for models that do not support scan by camera. The captured
image is displayed in the preview area. (page 24)
1. From the Send File screen, tap [Open menu] and then [Camera].
Scan by camera is started.
2. Tap [Take photo].
• If the "Detect Paper" check box is selected, a cropping frame (purple) is displayed at
the portion where the paper is detected in the image.
When the paper detection is successful, [?] in the upper right of the screen changes to
[OK].
• If the "Auto Shutter" check box is selected, the image is captured automatically when
the paper is successfully detected.
This option can only be selected when "Detect Paper" is enabled.
3. Correct the image.
(1)
(1) Original image display area
Shows the original image before it is corrected.
When "Ar. Com" is enabled, the cropping frame (purple) for the portion detected as the
paper is displayed. The cropping frame area can be modified by dragging it.
(2) Corrected preview display area
Shows the preview of the image after correction.
(3) Adjust image quality level
When "Qty Cor" is enabled, you can adjust the image quality level.
Drag the slider to the left and right to adjust.
4. Tap [OK].
The image preview appears. (page 24)
TIPS
• It may not be possible to properly correct the image depending on the capturing
environment and the original document.
- 23 -
(2)
(3)