Configuring Host Settings - Sharp PN-60TA3 Operation Manual

Configuring host settings

You can configure a variety of settings including those for the host name, communications, security, and action when a file is received.
TIPS
• Before adjusting these settings, consult the network administrator.
1. Tap the [Settings] on the Host menu.
The settings screen appears.
2. Set the options as necessary. (See the description below.)
3. When you have completed the settings, tap [Apply].
■ ■ [Basic Setting] tab
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) User Info
Tap [Edit] and set the host name and icon. (Up to 6 full-width or 12 half-width characters)
This name and icon is displayed on the client when logging in.
(2) Place
Sets the location of the host. (Up to 50 half-/full-width characters)
Content entered here is displayed on the client's login screen.
(3) Shared Display
Selects the display for which the screen will be shared with the client.
(4) Connection ID
Do not use Connection ID
Does not restrict the connected clients.
Auto-create Connection ID
Restricts the connected clients to only those that enter the connection ID.
Automatically creates a connection ID for each conference.
Use specified Connection ID
Restricts the connected clients to only those that enter the connection ID.
Sets the connection ID. (Up to 8 half-width alphanumeric characters)
(5) Prohibit acquisition of user memos
Prevents the client from managing user memos.
(6) Control Setting
Allow remote control from multiple computers
Remote control is possible from multiple clients at the same time.
Restrict remote control terminal to one. (Latest request)
Remote control is only possible for the client that obtains operation permission.
Restrict remote control terminal to one. (Admittion by host)
Remote control is only possible for the client that the host grants operation
permission to.
Do not allow remote control
Remote control is not possible from a client.
(7) Version
Shows the software version.
- 33 -