Configuring Settings In The Touch Menu - Sharp PN-70TH5 Operation Manual

Menu Items

Configuring settings in the touch menu

You can configure the following settings from the touch menu.
You can configure the settings by touch operation.
PICTURE
CONFIGURE QUAD-
SCREEN
OTHERS
nExample of operation
(Adjusting CONTRAST in the PICTURE menu)
1. Touch the TOUCH MENU button.
2. Touch the Settings icon (
3. Touch the PICTURE tab.
PICTURE
PICTURE
BRIGHT
CONTRAST
BLACK LEVEL
COLOR MODE
30
E
BRIGHT
CONTRAST
BLACK LEVEL
COLOR MODE
SETTING INITIAL
SCREEN
PRIORITY: AUTO INPUT
SEL.
SAVE LAST INPUT
CONFIG.
TARGET: SOUND /
INPUT SEL.
PORTRAIT/
LANDSCAPE INSTALL
LANGUAGE
TOUCH INPUT SELECT
TOUCH OUTPUT
INVALID DISP.
TOUCH OPERATION
MODE
PALM CANCEL MODE
TOUCH PANEL MODE
TOUCH OPERATION
TOUCH MENU button
).
CONFIGURE QUAD-SCREEN OTHERS
30
30
30
STD
4. Touch the
For items that show the >> icon, configure the setting in the
menu that appears after you touch the >> icon, and then
touch the BACK icon.
5. Touch the Exit touch menu icon (
page 32
TOUCH OPERATION
Use this setting to enable or disable touch action.
page 37
TIPS
• When the input mode is changed, the disable touch action
setting is canceled.
• When TOUCH OUTPUT INVALID ICON is set to ON and
touch action is disabled, the TOUCH OUTPUT INVALID
icon appears in the screen.
page 36
page 34
page 35
page 36
• You can touch the TOUCH OUTPUT INVALID icon in the
screen to enable touch action.
• The position of the TOUCH OUTPUT INVALID icon can be
changed. (See page 36.)
• The TOUCH OUTPUT INVALID icon appears even when a
USB cable is not connected.
• In quad-screen display or when a color pattern is displayed,
See right
the TOUCH OUTPUT INVALID icon does not appear.
icon in CONTRAST to adjust the setting.
).