Table of Contents
Advertisement
[WIRING PRECAUTIONS]
Be sure that the wires or cables connected to the module are stored in the duct or fixed with cramps.
Failure to do so may cause a damage to the module or cables due to dangling, shifting or inadvertent
handling of calbes, or malfunction due to bad cable contacts.
Do not install the control lines together with the communication cables, or bring them close to each other.
Failure to do so may cause malfunctions due to noise.
Do not grab on the cable when removing the communication cable or power cable connected to the module.
When removing the cable, loose the screws on the side that is connected to the module.
Pulling the cable that is still connected to the module may cause a damage to the module or cable, or
malfunction due to bad contacts.
[STARTING AND MAINTENANCE PRECAUTIONS]
Do not touch the terminals while the power is on.
Doing so may cause malfunction.
Make sure to switch all phases of the external power supply off before cleaning or re-tightening screws.
If you do not switch off the external power supply, it will cause failure or malfunction of the module.
If the screws are loose, it may result in fallout, short circuit or malfunction.
Tightening the screws too far may cause damages to the screws and/or the module, resulting in fallout,
short circuit or malfunction.
Do not disassemble or modify the module.
Doing so could cause failure, malfunction injury or fire.
Do not drop or give a strong shock to the module because its case is made of resin.
Doing so may cause a damage to the module.
Make sure to switch all phases of the external power supply off before mounting or removing the module.
If you do not switch off the external power supply, it will cause failure or malfunction of the module.
Mounting/removing the terminal block is limited to 50 times after using a product. (IEC61131-2-compliant)
Before handling the module, always touch grounded metal, etc. to discharge static electricity from the
human body.
Failure to do so can cause the module to fail or malfunction.
[DISPOSAL PRECAUTION]
When disposing of this product, treat it as an industrial waste.
CAUTION
CAUTION
CAUTION
Advertisement
Table of Contents
