Customizing The Equalizer Curve - Eq3 Tune - Sony MEX-BT5000 Operating Instructions Manual

Display
Image
To set various display images.
– "SpaceProducer" ( ): to create animated on-
z
screen patterns in time with the music.
– "All": to step repeatedly through the display
images in all display modes.
– "off": to not display any image.
– "SA 1 – 5": to display the Spectrum Analyzer.
– "Movie 1 – 3": to display a movie.
– "Wallpaper 1 – 3": to display a wallpaper.
– "SA All"/"Movie All"/"Wallpaper All": to
step repeatedly through the display images of
each mode.
Info (Information)
To display the items (depending on the source,
etc.).
– "All": to display all items.
– "Simple" ( ): to not display any items.
z
– "Clear": to have items automatically
disappear.
Demo*
1 (Demonstration)
To set "on" ( ) or "off."
z
Dimmer
To change the brightness of the display.
– "Auto" ( ): to dim the display automatically
z
when you turn lights on.
– "on": to dim the display.
– "off": to deactivate the dimmer.
Auto Scroll
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– "on": to scroll.
– "off" ( ): to not scroll.
z
Receive Mode
Local (Local seek mode)
– "off" ( ): to tune normal reception.
z
– "on": to only tune into stations with stronger
signals.
Mono (Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– "off" ( ): to hear stereo broadcast in stereo.
z
– "on": to hear stereo broadcasts in monaural.
IF
– "Auto" ( ): to automatically narrow the
z
reception frequency to eliminate noise.
– "Wide"* 2 : to always hear FM stereo
broadcasts in stereo and with full frequency
reception.
BTM (page 12)
Sound
EQ3 Preset
To select an equalizer type: "Xplod," "Vocal,"
"Edge," "Cruise," "Space," "Gravity," "Custom"
or "Off" ( ).
z
EQ3 Tune
See "Customizing the equalizer curve" on
page 19.
DSO
To select the DSO mode: "1," "2," "3" or "off"
( ). The larger the number, the more enhanced
z
the effect.
Balance
To adjust the balance between the right and left
speakers: "R10" – "±0" (
Fader
To adjust the balance between the front and rear
speakers: "F10" – "±0" (
Subwoofer
To adjust the subwoofer volume: "+10" – "±0"
( ) – "–10"
z
("– ∞" is displayed at the lowest setting.)
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off"
( ), "125Hz" or "78Hz."
z
AUX Level
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 21).
Adjustable level: "+6 dB" – "±0 dB" (
"–6 dB"
*1 When the unit is turned off.
*2 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.
Customizing the equalizer curve
— EQ3 Tune
"Custom" of EQ3 allows you to make your own
equalizer settings.
1
Select a source, then press (MENU).
2
Select "Sound" c "EQ3 Preset" c
"Custom," using the joystick.
3
Select "EQ3 Tune" using the joystick.
4
Select the desired frequency range
from "LOW," "MID" and "HI."
continue to next page t
) – "L10"
z
) – "R10"
z
) –
z
19