Firmware Update; Factory Data Reset - Samsung NX300 Service Manual

7. Firmware update

7-1 Factory data reset

This section describes how to reset the factory data.
■
1. Copy files such as nx_cs.adj & nx_dev.adj into the root directory of the SD Card. Insert the SD Card into the camera.
nx_cs.adj
nx_dev.adj
2. Power on the camera.
3. Select the Smart Auto Mode.
Copyrightⓒ since 1995 Samsung Electronics. All rights reserved.
Fig. 7-1
Fig. 7-2
Firmware update
Mode dial
7-1