Firmware Update; Product Reset - Samsung ST80 Service Manual

Hide thumbs Also See for ST80:

Table of Contents

4. Firmware update

This describes how to reset the camera to factory default setting.

■

1. First turn on the power of the camera.

2. Press the

WIDE button + SHUTTER button and then turn the

3. Turn the power of the camera on again to check whether it has been reset.

SAMSUNG

This Document can not be used without Samsung's authorization

Power ON

Fig. 4-1

POWER off.

Power OFF

Fig. 4-2

Fig. 4-3

Firmware update

WIDE Button + SHUTTER Button

4-1

Table of Contents