Samsung NX300 Service Manual page 67

Firmware update
6. Press the OK button to begin the body firmware update. Once it is complete, camera will turn off automatically.
!
CAUTION
■ Firmware update will take about 5 minutes. It will reboot twice during the firmware update process.
Screen seems to be turned off. However, do not turn off the camera or operate camera.
Once the update is complete, it will display update complete message on the screen.
7-8
[CAMERA]
- User Version : 0.51
- Full Version : nx300_DSP_X_PV1_F1301261
[SD-CARD]
- User Version :
- Full Version :
[H/W]
- Board Version : PV2 / Micom Version : -1
FW update by pressing the [OK] key.
Fig. 7-12
Copyrightⓒ since 1995 Samsung Electronics. All rights reserved.
OK button