Error Displays And Troubleshooting - eKey home KNX RS-485 Operating Instructions Manual

Step Action
6.
/
7.
8.
The ekey events "Security" and "Unknown" do not need to be configured
in the ekey multi control panel DRM. They are automatically triggered
when the conditions are met.

Error displays and troubleshooting

Display
KNX LED off
RS-485 LED off
RS-485 LED
permanently on
Description
Press or and select
Λ V
OK.
Press OK.
Swipe your finger
Meaning
There is no connection
to the KNX bus system.
The ekey converter KNX
RS-485 is not supplied
with power.
There is no data
connection to the ekey
finger scanner.
Display
KNX ri index finger
OK
DEV1: HOME SCENARIO
DEV2: empty
DEV3: empty
DEV4: empty
Swipe finger
or
Press [ESC]
Max
enabled
always
S Finger
S1 ----------X----
S2 ---------------
S3 ---------------
Remedy
Check the wiring of the KNX
bus system.
Check the function and the
wiring of the power supply.
Check that the ekey finger
scanner is functioning
properly.
Check the wiring between
the ekey converter KNX RS-
485 and the ekey finger
scanner.
R P
- -
- -
- -
en│17