Table of Contents
Advertisement
Event "Security"
The ekey event "Security" is triggered when the ekey finger scanner does
not recognize a finger several times in a row within a specified time span.
No settings need to be adjusted for this function in the ekey system (ekey
control panel).
You can set the following functions for the ekey event "Security":
Function
Settings
switch
on/off
amount of
0–50
failed
attempts
time zone
1-10 min
Table 5:
Description of event "Security"
ekey home control panel mini 1
ekey home control panel mini 2
No settings need to be configured on the ekey home control panel mini.
The following ekey events are automatically triggered in the KNX system:
□
If a finger is recognized, the event "ekey Event 1" is triggered.
□
If a finger is not recognized, the ekey event "Unknown" is
triggered.
□
The ekey event "Security" is triggered when the set conditions
are met.
NOTICE
Description
Switches an actuator on or off.
The ekey event is triggered when a
finger is not recognized by the ekey
finger scanner the selected number of
times.
The number of unrecognized fingers
must occur within this time span.
Use with ekey
home control
panel mini
en│9
Advertisement
Table of Contents
