Front Wheels - Beacon Athletics Streamliner 353 Assembly & Usage Manual

Streamliner 70
4-wheel Streamliner 70 ONLY (for 3-wheel model wheel assembly, see previous page)
•

FRONT WHEELS

Tools needed:
Two 3/4" wrenches
➊
Locate the parts
for front wheel
assembly.
• 2 no-flat tires
• 1 axle cover
• 1 axle bolt and nut
➋
Thread the axle bolt through one no-flat tire hub (extended portion of the hub is
designed to go toward the frame) as shown in figure 1.
➌
Push the axle bolt through the 1/2" hole on the front frame that extends
forward from the hopper.
➍
Slide the axle cover over the axle bolt (figure 2).
➎
Push axle bolt through the other 1/2" hole on opposite side of frame.
➏
Slide the second no-flat tire onto the axle bolt (remember, extended hub portion
toward the frame).
➐
Attach the axle nut and using your 3/4" wrenches, secure the axle nut to
the axle bolt. DO NOT OVER TIGHTEN. Make sure the tire rotates freely.
This completes assembly for the 4-wheel Streamliner 70.
6
6
BeaconAthletics.com
A S S E M B L Y
Continue to "Operation" on page 8.
|
800-747-5985
|
Front Wheels
I N S T R U C T I O N S
|
fax 608-836-0724