All Models - Beacon Athletics Streamliner 353 Assembly & Usage Manual

All Models

A S S E M B L Y
Rear wheel assembly is the same for both Streamliner models.
REAR WHEELS
•
Tools needed: standard pliers
➊
Locate the parts needed for
assembly.
• 2 no-flat drive tires*
• 2 cotter pins
➋
Place the long hub of the first drive
tire over the axle.
➌
Align the holes in the wheel hub and
axle and insert cotter pin as shown.
➍
Bend both sides of the cotter pin
to secure in place.
➎
Repeat steps 2-4 for assembling
the second tire.
* NOT...: Drive tires include a crosscut hole
in the long hub for a cotter pin.
If you prefer a 2-wheel Streamliner, your assembly is complete.
@beaconathletics
|
Rear Wheels & Handle
I N S T R U C T I O N S
•
Continue to "Operation" on page 8.
|
/beaconathletics1948
RETRACTABLE HANDLE
Tools needed: none
➊
Locate the handle for assembly.
➋
Align the push button on the handle
stem with the holes located on the
handle already on the Streamliner.
➌
Gently insert the handle assembly into
the handle on the Streamliner.
➍
Slide the handle to the desired position
until the push button snaps into place.
When storing, push the button and
slide the handle all the way down to
the last hole.
|
BeaconAthletics.com
3 33