THUNDER TIGER Mini Titan E325 SE Manual page 30

Electric System- 3
No. Description
1 Tail Linkage Rod
2 Ball Link, ø3.8x12
3 Linkage Ball, ø3.8
4
Countersunk Screw, M1.6x6
5
Bracket
St e p 1
1.Apply CA or Epoxy when assembling the Tail Support Rod End.
2.Install the Tail Support Bracket and fit the Tail Support Rod.
St e p 2
1.Remove the tail servo wheel prior to attaching the Linkage Ball.
2.For the rudder servo, mount the Linkage Ball at 10.5mm from the center of the servo arm
as beginning. Please refer to the manual of your gyro to choose the length of the arm.
3.Secure the servo to the Tail Servo Tray and attach the rod to the servo arm.
Q'ty
1
2
1
1
1
(8)
(3)
(1)
(4)
(2)
No. Description
6 Socket Screw, M2x14
7 Nut, M2
8 Tapping Screw(w/washer), M2x10
9 Carbon Rod, D3x255mm
10 Tail Support Rod End
(9)
CA or Epoxy
Q'ty
1
1
2
2
4
(10)
(6)
(5)
T22
(7)
Ba g L
-29-