Electric System - THUNDER TIGER Mini Titan E325 SE Manual

Electric System- 1

No. Description
1
Motor Mount
2
Socket Screw, M3x5
3
Set Screw, M3x3
St e p 1
1.Mount the motor to the Motor Mount.
2.Secure the Drive Gear to the motor shaft. Note that the distance from the end of the Drive
Gear to the Motor Mount should be around 16mm as shown.
(1)
T22
(4)
(2)
(3)
T22
N ot e 2 :
You can observe the gear
mesh from the bottom of
Base Plate.
Q'ty No. Description
1 4 Drive Gear, 13T
2 5 Socket Screw, M3x10
1 6 Nylon Nut, M3
N ot e 1 :
The OBL29/37-10H Brushless Motor and 13T pinion
are recommendced for mini Titan E325 with ACE
POWER 3S1P Li-Po battery.
St e p 2
1.Attach the motor and the Motor Mount to the
Main Frame.
2.Adjust the gear mesh and secure the Motor
Mount on the chassis.
16mm
(6)
Ba g K
Q'ty
1
2
2
(5)
-27-