Maintenance - Campbell Hausfeld HV2000 Series Operating Instructions & Parts Manual

Maintenance

Be sure the air filter is clean. A dirty air
filter restricts air flow and can cause
the motor to overheat.
Filter located
behind filter
grill
Figure 8
IMPORTANT: Keep the unit at the
maximum distance from the spray
area to extend filter life.
REMOVING THE AIR FILTER
Models HV1000 and HV1500
Pull filter
grill off
to reveal
filter
Figure 9
Remove
filter for
cleaning
Figure 10
HV1000, HV1500 and HV2000 series
Model HV2000
1. Remove thumbscrew.
Filter
grill
Thumbscrew
Figure 11
CLEANING THE AIR FILTER
• If using latex (water-based)
coatings, use mild soapy water
to clean filter. Remove excess
water with a soft cloth. Allow to
dry flat before reinstalling filter.
• Replace filter if built-up with
paint, or if using oil-based (sol-
vent-based) coatings.
Do not attempt to
clean with mineral
spirits or other solvent.
For Information About
This Product
Call 1-800-626-4401
www.campbellhausfeld.com
5
Filter