Registering In Sonicos - Dell SonicWALL NSA 6600 Getting Started Manual

NSA_6600_GSG.book Page 18 Wednesday, April 3, 2013 4:52 PM
Registering Overview
Although there are several ways to your new Dell SonicWALL
appliance, Dell SonicWALL recommends registering your
appliance through the SonicOS Management Interface.
This section describes how to register and license your
appliance through SonicOS, as well as the alternate options
available on MySonicWALL.
18 | Registering Overview

Registering in SonicOS

After you have completed the Setup Wizard and can
successfully connect to your Dell SonicWALL NSA 6600
appliance, you are ready to register the security appliance.
If your Dell SonicWALL NSA 6600 restarted, log into your
appliance again at <http://192.168.168.168>. Enter the default
username and password (admin / password). Then, click
Login.
1. Navigate to the System > Status page.
A message displays at the top of the screen that your
Dell SonicWALL appliance is not registered. Click the
Register link.
2. Enter your MySonicWALL username and password in the
appropriate fields. Then, click Submit.
If you haven't created a MySonicWALL account, see the
Creating a MySonicWALL Account
3. In the Licenses > License Management page, specify a
Friendly Name for the Dell SonicWALL appliance.
4. Complete the Product Survey. Then, click Submit.
Acknowledge the registration completion notification by
clicking Continue. The Licenses > License Management
page now lists all the Security Services associated to your
appliance.
section, on page 10.