Table of Contents
Advertisement
Activating Licenses in SonicOS
After completing the registration process in SonicOS, you must
perform the following tasks to activate your licenses and enable
your licensed services from within the SonicOS user interface:
• Activate licenses
• Enable security services
• Apply services to network zones
This section describes how to activate your licenses. For
instructions on how to enable security services and apply
services to network zones, see the following sections:
•
•
To activate licensed services in SonicOS, you can enter the
license keyset manually, or you can synchronize all licenses at
once with MySonicWALL.
The Setup Wizard automatically synchronizes all licenses with
MySonicWALL if the appliance has Internet access during initial
setup. If initial setup is already complete, you can synchronize
licenses from the System > Licenses page.
33
| Initial Setup
Manual upgrade using the license keyset is useful when the
appliance is not connected to the Internet. The license keyset
includes all license keys for services or software enabled on
MySonicWALL. It is available on MySonicWALL at the top of the
Service Management page for the appliance.
To activate licenses in SonicOS:
1.
Navigate to the System > Licenses page.
2.
Under Manage Security Services Online do one of the
following:
• Enter your MySonicWALL credentials, then click the
Synchronize button to synchronize licenses with
MySonicWALL.
• Paste the license keyset into the Manual Upgrade
Keyset field.
3.
Click Submit.
Upgrading Firmware
The following procedures are for upgrading an existing
SonicOS image to a newer version:
•
•
•
•
•
- Quick Links:
- In this Guide
Hide quick links:
Advertisement
Chapters
Table of Contents
