Tray Unit-L - FujiFilm NXT Setup Manual

1. Safety Guideline
1.3.2

Tray Unit-L

When pushing the tray unit-L into the machine, ensure that no
one is between the tray unit-L and machine base.
• A person could be seriously injured or crushed to death if caught
between the tray unit-L and machine.
Lock the caster brake whenever the tray unit-L is removed from
the machine.
• Depending on the slope and condition of the floor, the tray unit-L
could roll unexpectedly, possibly resulting in injury.
Be careful to not pinch your fingers when opening or closing
the tray unit-L covers (upper cover, front cover, lower cover,
etc.). Do not leave the doors open while the tray unit-L is
unattended.
• Failure to do so could result in injury.
When operating the handle for adjusting the tray unit-L height,
make sure that hands are not caught between the handle and
cover.
• Failure to do so could result in injury.
When removing or replacing the empty tray box, be careful to
not pinch your hands between the tray unit-L and empty tray
box.
• Failure to do so could result in injury.
Do not insert your hand through the bottom of the tray unit-L
into the inner section where the mechanical parts are.
• Failure to do so could result in injury.
10
WARNING
CAUTION
QD002-07
NXT Setup Manual