Settings Menu - auna iAdapt Manual

Table of Contents

Advertisement

Available languages

Available languages

Display
(time display)
My MediaU
Network
Datum & Zeit
Wecker
Timer
Language
22

Settings Menu

Analog / digital
When it is enabled, My mediaU will be shown on the main menu. If various mediaU
accounts exist for the Radio, Select the default login account in here.
Wireless Network Configuration: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically select the required AP.
Enter WEP or WPA code to connect the WiFi.
Wireless Network (WPS PBC): If you are using a router with WPS/QSS but-
ton, you may set up the network connection simple via WPS function. Enter
it and go to press the WPS/QSS button on your router within 120 seconds.
The connection between the router and Music Link will then be configured
automatically.
Manual Configuration: You can choose DHPC (which IP assigned automati-
cally) or manually input IP address for wireless network connection. When
you select manual setting for wired connection, the following have to be en-
tered: SSID (name of access point), IP Address, subnet mask, default gateway,
preferred DNS server, alternate DNS server.
Check Network When Power On: Enable/disable WiFi network. When you
enable the WiFi network, the system will automatically search the available
AP. Select required AP.
Setup the date and time
Set time format display as 12 Hour or 24 Hour
Set date format (YYYY/MM/DD - DD/MM/YYYY - MM/DD/YYYY)
There are three independent alarms - 2 alarms of absolute time setting (Alarm 1
and Alarm 2) and 1 alarm for relative time setting (Alarm NAP). Press Alarm on the
remote control to enter this menu directly.
Note that the alarm source is from the preset Internet radio if Alarm Sound is set
to be Internet Radio. It can only set one same IR station for Alarm 1 and Alarm 2.
When the alarm time is reached, the unit connects to the Internet if the set network
is available. Therefore there may be some delay from the alarm to the radio play.
If no network is connection can be established within one minute, the alarm will
change to Melody automatically.
When Alarm NAP is set, it alarms once in 5/10/20/30/60/90/120 minutes depen-
ding on which one you have set.
Choose Alarm Volume to configure the volume of the alarms.
Countdown timer (max. 100min)
English / Deutsch / Espanol / Francais / Portugese / Nederlands / Italiano/
Pyccknn / Svenska / Norske / Dansk / magyar / Cesky / slovensky / polski / Turkce / Suomi

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents