Adding A Page To A Problem; Moving Through Pages In A Document - Texas Instruments TI-Nspire CX Getting Started Manual

/S
5. Press

Adding a page to a problem

Each problem can contain up to 50 pages. To add a new page to a
problem:
/ ~
Press
application
—OR—
c
Press to display the Home screen, then point to the application
you'd like to add to the new page and click or tap.
A new page is added to the current problem.
Note: The tab at the top left of the screen indicates that this is the
second page of the second problem.

Moving through pages in a document

Tabs display up to three multiple pages. When a document contains more
than three pages, arrows appear on the left and right of the tabs.
Use the following keys to navigate through your documents.
/
3 displays the previous page.
•
/
4 displays the next page.
•
/
5 displays the Page Sorter.
•
/ ¤
• displays the previous view.
• Use the Touchpad to click on the arrows that appear on either side of
the tabs to show additional pages in a document containing more
than three pages.
42 Working with documents on the CX handheld
to save the change.
/ I
or to add a blank page and select an